...

SJS Enersol

NPS 1/2 – NPS 2

1/2 to 2 Other Dimensions:
1/2-2|2½-5|6-14|16-24
NPS
1/2
3/4
1
2
OD
21.3
26.7
33.4
42.2
48.3
60.3
Wall Thickness
Sch 5
1.65
1.65
1.65
1.65
1.65
1.65
Sch 5S
1.65
1.65
1.65
1.65
1.65
1.65
Sch 10
2.11
2.11
2.77
2.77
2.77
2.77
Sch 10S
2.11
2.11
2.77
2.77
2.77
2.77
Sch 20
Sch 30
2.41
2.41
2.90
2.97
3.18
3.18
STD
2.77
2.87
3.38
3.56
3.68
3.91
Sch 40
2.77
2.87
3.38
3.56
3.68
3.91
Sch 40S
2.77
2.87
3.38
3.56
3.68
3.91
Sch 60
XS
3.73
3.91
4.55
4.85
5.08
5.54
Sch 80
3.73
3.91
4.55
4.85
5.08
5.54
Sch 80S
3.73
3.91
4.55
4.85
5.08
5.54
Sch 100
Sch 120
Sch 140
XXS
7.47
7.82
9.09
9.70
10.15
11.07
Sch 160
4.78
5.56
6.35
6.35
7.14
8.74
Wall Thickness
OD
21.3
26.7
33.4
42.2
48.3
60.3
NPS
1/2
3/4
1
2
1/2 to 2
Other Dimensions:
1/2-2|2½-5|6-14|16-24

NPS = Nominal Pipe Size O.D. = Outside Diameter
Dimensions are in millimeters unless otherwise indicated.

DIMENSIONAL TOLERANCES FOR SEAMLESS AND WELDED PIPES ASTM A530
Nominal pipe size
up to 4 = ± 0.79 mm | 5 thru 8 = + 1.58 mm / – 0.79 mm
10 thru 18 = + 2.37 mm / – 0.79 mm | 20 thru 24 = + 3.18 mm / – 0.79 mm
Wall Thickness
All Diameters = – 12.5%
+ tolerance not specified
Length
+ 6.40 mm / – 0 mm
Weight
Weight = + 10% / – 1.5%
DIMENSIONS AND DIMENSIONAL TOLERANCES

UNITS OF MEASURE

American pipe standards use imperial and metric (SI) units for measurement. It is important not to combine the use of these units since rounding of dimensions has resulted in an incompatibility between some values.

DIMENSIONS

Standard dimensions for welded and seamless wrought steel pipe for high or low temperatures and pressures are described in ASME B36.10. Standard dimensions for welded and seamless wrought stainless steel pipe are described in ASME B36.19. The suffix “S” in the Schedule Number is used to differentiate B36.19 pipe from B36.10 pipe. ASME B36.10 includes other pipe thicknesses which are also commercially available with stainless steel material.

DIMENSIONAL TOLERANCES

The basic permissible variations, including pipe length and straightness requirements, are defined in ASTM A530, this standard being referenced by all ASTM pipe standards.

Reviews

There are no reviews yet.

Be the first to review “NPS 1/2 – NPS 2”

Your email address will not be published. Required fields are marked *